'/%3E%3C/svg%3E){kind=small}
Water-based Underbody Coating
Water-based, low-VOC underbody and stone-chip coating
Description
- Excellent adhesion and corrosion protection
- Replicates OEM finishes – professional repairs
- No sanding before overpainting – time-saving
- Colour change – visual curing indicator
- Fresh material water-removable – no solvents needed
- Compatible with all common automotive paints
Additional information
| Color | Grey Black |
|---|---|
| Content | 1 l |
Application
KENT Water-based Underbody Coating can be applied to epoxy primers and polyurethane fillers, as well as cured paint and directly to metal. Once cured, it forms an elastic, abrasion-resistant film that protects against corrosion, stone-chip damage and road salt. It is compatible with all common types of automative paints.
The colour of the product changes during the curing process, providing a clear indication of its progress. As it is not hygroscopic, it is not necessary to apply a top coat.
Instructions
- Remove rust, dirt, grease and other contaminants; the surface must be clean and dry.
- Shake thoroughly before using.
- Apply with KENT Underbody Coating Spray Gun (86190) or KENT Schutz Air Gun (34483). Adjust air pressure, spray distance and nozzle to create different finishes.
- The surface can be overpainted after approx. 60 minutes, depending on the ambient temperature, humidity and film thickness. Best results will be achieved at room temperature.
- Fresh product or overspray can be removed using warm water. Once cured, use KENT Acrysol.
N.B.: Do not use in areas with a relative humidity of more than 80%. Best results will be achieved at room temperature (20°C). To aid the drying process, apply in a well-ventilated area.
Your challenge – our solutions
