Super Bond
An universal medium viscosity instant adhesive giving strong permanent repairs
Description
Instant adhesion –super fast in just 5 secImproved formula –in a high quality bottle for a long shelf lifeOptimum viscosity –the best choice for most applicationsStrong performances –high tensile and shear strengthsNo blooming –for a perfect finish on visible repairsFor most materials –bonds a large range of materials, including porous substrates
Additional information
| Color | Transparent |
|---|---|
| Content | 1 piece 10 g |
Application
Super Bond is the most universal instant adhesive for a wide range of applications. It has been formulated to an optimum viscosity which is thin enough to penetrate joints and thick enough not to run off the area to be bonded.Super Bond shows excellent performances on most substrates: steel, aluminium, PVC, plexiglass, polycarbonate, ABS, rigid polystyrene, elastomers (e.g. rubber), glass, cardboard, paper, leather, etc. It can also be used on porous substraets.Super Bond doesn’t bloom and is therefore well suited for cosmetic applications or visible repairs.
Manuals
1. For best results, surfaces to be bonded must be clean, free from dirt, waxes, oils, etc., using KENT Acrysol or Soft Surface Cleaner.2.Protect your hands using gloves, to avoid fingers to stick together.3. Apply sparingly to one surface only.4. Bring the surfaces together immediately, taking care to ensure the correct alignment.5. Apply firm pressure to ensure that the adhesive spreads into a thin film.6. Do not disturb or re-align until the curing is achieved (normally in a few seconds).7. Any surplus liquid adhesive may be removed with KENT Acrysol or Soft Surface Cleaner.8. Always close cap after use, ensuring it is correctly secured, and wipe the tip clean.Use KENT Super Bond Activator to improve bond strength, e.g. for hard-to-bond materials, or to accelerate curing process. Please refer to the technical data sheet for the instructions for use.
Your challenge – our solutions
