Nutlock
General purpose medium-strength threadlocker, suitable for all metal threaded assemblies.
Description
Blue medium-strength threadlocker –can be disassembled with hand toolsHighly resistant to vibrations –ideal for locking assemblies on moving partsHigh temperature resistance –up to +180°CIncreased oil tolerance –locks assemblies even when not completely cleanPrimerless on active and passive metals –saves time in the maintenance and repair operationHigh chemical resistance to most industrial liquidsNon-hazardous –safe for the user and the environmentNSF P1 registered –for use in food-processing environment
Additional information
| Color | Blue |
|---|---|
| Content | 50 ml |
Application
Nutlock locks and seals threaded fasteners up to 1-1/4″ (M36), and prevents loosening and leakage on vibrating assemblies, e.g. engines, pumps and gear boxes. Nutlock cures in the absence of air between close fitting metal parts – active metals such as brass and copper, and passive metals such as stainless steel, aluminium and plated surfaces. The curing speed varies depending on the surface. For increasing the curing speed, use KENT Anaerobic Activator. Nutlock can be applied on surfaces presenting traces of cutting oils, lubricants and protection liquids.
Manuals
1. Clean all threads with KENT Soft Surface Cleaner. 2. If required, apply KENT Aanaerobic Activator on all threads and allow 30 to 60 seconds to dry.3. Insert the bolt through the hole assembly.4. Apply Nutlock on both bolt and nut. 5. Assemble and tighten nut to required torque. Don’t move parts after tightening.6. Functional strength is achieved in 3 to 6 hours depending on the nature of the surface and the size of the thread. Allow 24 hours curing time in order to achieve full strength.
Your challenge – our solutions
