Transparent Waxcoat
Transparent wax-based coating with excellent anti-corrosion properties for cavities and surfaces, available as liquid and aerosol
Description
- Excellent corrosion resistance – protects against environmental corrosion
- Self-healing properties – resists damage and provides long lasting protection
- High penetration – penetrates and coats hard-to-reach areas
- Low odour – pleasant to use
- No dripping one hour after application – can be used with confidence
- Good adhesion properties – can be used throughout the vehicle
Additional information
| Color | Transparent |
|---|---|
| Content | 500 ml 1 l |
Application
Transparent Waxcoat is preferably used in cavity areas such as doors, bonnets, cross members or reinforcements. It is also used in trailers and caravans, bus and coach work and general metalwork.
Transparent Waxcoat can be used as a protective coating in the engine compartment after engine washing in the temperature range up to 180 °C.
Instructions
- The surface to be treated must be clean and dry, and free from rust, dust and grease. Use Acrysol to clean and prepare the surface, if necessary.
- Shake well before use.
- The liquid can be applied using light airless spray equipment, an air-line fed gun or a pressure pot gun with an air pressure of 3 – 6 bar. Brushing or dipping is also possible.
- Apply the aerosol in even coats, building up the desired layer thickness.
The product remains soft and sticky to the touch, a characteristic of the wax coating.
Your challenge – our solutions
