Toughcoat
A paintable, tough, hard and durable stone chip finish which also works as a sound deadening coating
Description
- One coat coverage – saves time and money
- Fast paint over – lightweight formula
- Replicates most OEM finishes – professional repair
- 3 colours available – right colour for every job
- High build formula – covers welds and seams
- Stone chip and underbody coating in one – reduces stock
- Plastic bottle – lighter and less prone to deformation than metal Schutz-style cans
- Sandable – can blend texture
- High solids (60 %) – fully VOC compliant
- IR drying possible
Additional information
Color | White Black Grey |
---|---|
Content | 1 l |
Application
Toughcoat is a paintable, tough, hard and durable stone chip finish to protect vehicle body panels from corrosion, salt, moisture and stone chip damage. It is fast to overcoat, it covers in one coat and replicates the OEM finish found on most vehicles. It is available in black, grey and white.
Toughcoat can be applied to all lower surfaces of the vehicle such as wheel arches, boot and floor pans. It can be used on suitably prepared bare metal (use Etch Primer first when coating aluminium) and original paint surfaces.
Due to its sound deadening properties, it can also be chosen as a coating for inner parts and the motor compartment. Its ability to be painted over makes it ideal for lower body protection against stone and gravel chips as well, making it the perfect solution for protective finishes on sill panels and front and rear lower body panels.
Instructions
- Clean and degrease old paint surfaces thoroughly, wet flat with P400 grit sandpaper (P180 for bare metal).
- Wipe the entire surface with Acrysol and allow to dry.
- Shake well before use.
- Apply with Underbody Coating Spray Gun (86190) or Schutz Air Gun (34483), adjusting air pressure to achieve required finish. Allow approx. 10 – 15 minutes between coats for solvent to flash off when building a thick coat.
- Clean spray gun thoroughly after use.