Soft Interface Pads
Interface pads to fit between a backing plate and any multi hole machine sanding discs. The pads allow work with fine and micro-fine grits to leave less scratch marks and to work on curved and irregular surfaces.
Description
5mm thickness –leaves less marks with 320 grits and finer grits10mm thickness –ideal for curved and irregular surfacesHigh Quality Velcro –keeps the sanding disc perfectly in position15 hole style –suits most commonly used extraction systemsThick fabric construction –long lasting grip to the Back-Up Pad
Additional information
| Color | Black |
|---|---|
| Content |
Application
The 5mm interface moderates the abrasive action and allows a smoother refinish, with less marks, on sanded fillers or coatings.The construction allows equal performance at up to half the price of competitive Soft DiscsThe 10mm interface allows the sanding disc to follow the line of curved and irregular surfaces, rather than cutting into a change in shape.The pad allows machine sanding to be used, where previously hand sanding would have been employed. This gives a better finish in less time
Manuals
1. Select the required interface pad to suit the job.2.Apply to the Sander backing pad, ensuring it is applied centrally, and with the dust extraction holes aligned with those on the backing pad.3. Apply the Abrasive Disc to the pad, ensuring alignment of extraction holes and start the machine.4. When the sanding disc has reached the end of its life, remove and replace with a new disc
Your challenge – our solutions
