Lights Clear Coat Kit
A kit to re-light and renew the brightness of plastic, polycarbonate or Makrolon®
car lights
Description
- 3K finishing coat with excellent adhesion to polycarbonate plastics and organic glasses – versatile applications
- Does not alter the characteristics of the plastic – retains mechanical properties of the plastic
- Excellent flow proprieties – provides perfect finish
- High UV protection – prevents yellowing of surfaces
- Does not pulverize with ageing – long-lasting
Additional information
| Color | Transparent |
|---|---|
| Content | 1 x UV Dye gun;1x UV LED;1 x UV protection goggles;1 x 7,5ml UV dye cartridges;2 x 30ml UV dye |
Application
To restore and protect polycarbonate plastics from yellowing after the removal of engravings or deep scratches.
Ideal for vehicles headlights, marine and camper components.
Instructions
- Completely remove the old film.
- Remove any scratches by dry sanding with a cycle starting with grit P240, then P400 and finally P600.
- Finish sanding with the included MF (microfine) sponges.
- Carefully degrease with a water-based cleaning agent.
- Mix the product according to the following ratio:
Clear coat: 2 parts in volume
Hardener: 1 part in volume
UV protector: 1 part in volume - Carefully mix and filter with 5000 mesh.
- Pot life: 90 min at 20 °C
- Apply using paint/clear coat guns with 1.0 – 1.3 nozzle at 2.5 bar.
- Spray two layers, waiting 30 sec between layers.
Thickness: 25 – 40 µm
Drying: 30 minutes at 60 °C / 10 – 15 minutes with short IR - Use a Carbon Block to remove any imperfections and then polish with Ceramic Abrasive Polish and a medium pad.
Your challenge – our solutions
