Fleet Treat 950
Especially formulated to treat and maintain all fuel systems contaminated with water, residues, sludge and deposits.
Description
Absorbs and suspends water, dirt, gums, residues etc. in fuel –removes contamination Removes source of corrosion –helps protect the fuel system against corrosion Will not damage catalytic converters –compatible with diesel & petrol engines
Additional information
| Color | Blue |
|---|---|
| Content | 250 ml 5 l |
Application
KENT Fleet Treat 950 can be used to treat both petrol and diesel fuel and is suitable for use in cars, lorries, buses, marine and industrial applications including both temporary and permanent storage tanks. KENT Fleet Treat 950 is particularly suitable for applications where fuel has been left to stand for a period of time. Even where fuel is added regularly to the fuel tank, the fuel quality is dependent on the storage conditions of the bulk fuel and condensation is often a problem. Fleet Treat 950 will help absorb water into the fuel, and will dissolve and suspend gums and residues that can build up in fuel systems over time. KENT Fleet Treat 950 will help prevent phase separation, caused by water contamination in petrol containing bioethanol, such as E10. Ideally KENT Fleet Treat 950 should be used as a preventative treatment.
Instructions
1. Add one 250ml bottle to 50 – 60 litres (approximately 1 part to 200 parts) of fuel.2. For badly contaminated systems, increase the dosage level to a maximum of 1 litre of Fleet Treat 950 to 50 litres of fuel. 3. Use at regular intervals to maintain optimum fuel performance. Ideally should be used when filling the fuel tank up to aid complete mixing.4. Use at ratio of up to 1 part 1000 parts of fuel when treating fuel storage tanks.
Your challenge – our solutions
