Ultra Finish
Ultra Finish combines easy processing with fast drying and reduced sanding effort with the highest surface quality.
Features & Benefits
- Super smooth surface - ensures the highest surface quality of the repair area Replaces coarse sanding with fine sanding - shortens the repair process and reduces material costs No clogging of the sandpaper - ensures a continuous removal during sanding and a longer shelf life of the sanding paper Fast drying properties at 20°C - reduces energy consumption and contributes to economic efficiency Spot repair suitable - also for filing stone chips, scratches and other damage in the coating.
Application
Ultra Finish the fine filler for highest surface quality of the repair area in thin layers. Its exceptionally good sanding properties and the smooth, non-porous surface allow sanding with grit P320 without clogging the sandpaper. Suitable for smoothing uneven and damaged areas in the coating. Also intended for smoothing surfaces previously filled with coarse putties, such as closing pores or scratches. Perfect use on metals as well as on different types of vehicles such as electric cars and hybrids is guaranteed.
Instructions
1. The substrate must be load-bearing, sanded, clean, dry and free of residues.
2. Throughly mix putty and 2-3% of BPO hardener by weight until a homogeneous shade of colour is achieved.
3. The mixture has a pot-life of about 5 minutes at 20 °C. Higher temperatur can reduce the pot life.
4. After 16 to 30 minutes the bodyfiller can be sanded: hand - machine dry sanding use P120 - P320. The hardening process is accelerated by heat and delayed by cold, not recommended to use below 15 °C.
