Super Bond Pen
A universal instant adhesive in a pen for strong high-precision repairs
Features & Benefits
- Instant adhesion - super fast in just 5 sec
- Precision pen - for high precision applications
- Strong performances - high tensile and shear strengths
- No blooming - for a perfect finish on visible repairs
Articles
| Attributes | Article | Downloads | |
|---|---|---|---|
| 1 PC Transparent | 86923 | SDS | |
Application
Super Bond Pen is the best choice for high precision applications, e.g. tiny assemblies, electronics, scale modeling, etc.
Super Bond Pen shows excellent performances on most substrates: steel, aluminium, PVC, plexiglass, polycarbonate, ABS, rigid polystyrene, elastomers (e.g. rubber), glass, etc.
Super Bond Pen doesn’t bloom and is therefore well suited for cosmetic applications or visible repairs.
Instructions
1. For best results, surfaces to be bonded must be clean, free from dirt, waxes, oils, etc., using KENT Acrysol or Soft Surface Cleaner.
2. Protect your hands using gloves, to avoid fingers to stick together.
3. Apply sparingly to one surface only.
4. Bring the surfaces together immediately, taking care to ensure the correct alignment.
5. Apply firm pressure to ensure that the adhesive spreads into a thin film.
6. Do not disturb or re-align until the curing is achieved (normally in a few seconds).
7. Wipe the tip clean and close cap after use, ensuring it is correctly secured.
Use KENT Super Bond Activator to improve bond strength, e.g. for hard-to-bond materials, or to accelerate curing process. Please refer to the technical data sheet for the instructions for use.
