Radiator Oil Emulsifier
An innovative blend of highly effective chemicals to enable the flushing of emulsified oil from the coolant system caused by head gasket, oil water cooler or other failure
Features & Benefits
- Suitable for use in all cooling systems - Time saving
- Fast acting - Improves cooling system efficiency
- Contains powerful additives - Destroys all emulsified oils
- Cleans entire cooling system in one application - Reduces risk of overheating
Application
A highly effective, fast acting cleaner for the removal of emulsified oils from cooling systems. Cleans entire coolant system in one application by destroying the emulsified oil. Safe in aluminium engines and ideal for use in routine preventative maintenance during engine coolant antifreeze change.
Instructions
1. Set Heater controls to “Hot”.
2. Ensure radiator drain plug is free if no drain plug is fitted ensuring bottom hose clip is serviceable.
3. Start engine and run until normal running temperature is achieved then switch off engine.
4. Adjust the coolant level to accommodate 250ml of product avoiding discharge through the overflow.
5. Add product through the water filler cap.
6. Restart engine and allow to run for five minutes. Switch off engine remove drain plug or bottom hose taking care to avoid contact with hot coolant draining all the coolant immediately into a suitable receptacle.
For larger cooling systems (100l or more):
1. A 250ml bottle of oil emulsifier will pick up its own weight in water and oil. The number of bottles used is dependent on the capacity of the cooling system and the amount of oil in the system. Bring engine up to temp, add 2 bottles, run for 5 mins, and switch off.
2. Check (carefully) if contents of radiator are opaque/milky, if within 10 seconds oil appears on the surface then another treatment is required.
3. Repeat process, either by adding another bottle or 2 to the cooling system or drain the system and add 2 bottles, then repeat. This step may be dependent on where the drain cock is and the safety aspect of the process.
4. For the best results we recommend that the cooling system is treated with 2 bottles and flushed through then repeat process with another 2 bottles.
