Python Wrap
Python Wrap is a unique, easy-to-use, quick action system, which when properly applied will repair broken parts damaged through everyday wear.
Features & Benefits
- Easy to use - no mixing required and applied by hand
- High temperature resistance - up to 260°C
- High chemical resistance - resistant to petrol, oil, acids, alkali and a wide range of other chemicals
- Fast initial cure - system can be switched on after 30 minutes
- Paintable after sanding - can be reworked after 30 minutes and allows quick repairs
Application
Python Wrap's high strength adhesion enables quick repairs to pipes, tool handles, engine hoses, tanks, irrigation systems, sprinkler systems and containers. It can be used to plug holes in boats, leaking pipes, sprinkler systems and for numerous types of instant repairs.
Python Wrap's high temperature resistance (260°C) makes it an excellent repair for exhaust systems and other areas subjected to elevated temperatures. Once cured, Python Wrap can be sanded and painted if desired.
Python Wrap will bond s to almost anything: Clay, Lead, Steel, Copper, Cast iron, Rubber, Plastics, Concrete, Fiberglass & Aluminum
Instructions
1. Clean and roughen area to be repaired. Pipes and hoses should be shut down prior to repair.
2. Remove the adhesive backing from the leak patch and apply directly over the break or hole.
3. Wearing enclosed gloves, tear open foil pouch at the notched area.
4. Remove Python Wrap from the foil pouch and soak in warm water for 20 seconds.
5. Using entire roll, wrap Python Wrap approximately 5 cm above repair area, working it directly over the leak patch.
6. Continue wrapping and extend Python Wrap approximately 5 cm below repair area. Continue wrapping until all Python Wrap is used.
7. Squeeze and mold Python Wrap in the direction of wrap, removing excess water while spreading resin until tacky to touch.
8. Wait 30 minutes before reapplying pressure to the system.
N.B. Python Wrap will not hold pressure until it’s fully cured.
