Foam Backed Door Skin Adhesive Roll
An easy way to replace the inner door skin membrane.
Features & Benefits
- Replaces inner door skin membrane - Provides a Repair / Seal to OEM standard
- Easy fit - Saves Time
- Sound deadening - Reduces road noise
- Easy dispensing roll - Easy and convenient to use
Articles
| Attributes | Article | Downloads | |
|---|---|---|---|
| 600 mm x 10 m White | 84296 | TDS | |
Application
An easy way to replace inner door skin membrane.
KENT foam backed door skin adhesives rolls comes in a single length which can be cut to size.
The release liner grid is printed on to the paper to allow difficult shapes to be cut from it easily.
Packaged in easy to use dispenser box.
Instructions
1. Pull out enough material out of the dispensing box. Lay on flat surface with the paper grid side face up. If possible lay the old door skin foil over the top.
2. Trace around the old skin with a marker. If no door skin film is available offer the skin to the door and trace round while on the car door itself.
3. Remove the old liner and you should be left with a guide line to the desired shape.
4. Cut the film following the trace lines.
5. Once you have finished cutting the shape out, you are ready to fit it to the car. Peel off the release liner to expose the adhesive. Position this on the door taking care to ensure it is in the correct position. Press firmly in place.
6. Replace the inner door panel and fix all the interior parts back on to the car.
