Exhaust Paste

Exhaust Paste is a one part dual heat and air cure system based on a modified Silicate Cement. It is used when assembling exhaust components together to give leak free joints.

scroll me

Features & Benefits

  • Asbestos free - Safe to use
  • -50°C to +1500°C - Wide operating temperature
  • Good adhesion to metal, brick and concrete
  • Skin time of 5 minutes (20°C/ 50%RH) - Fast re-assembly of components
  • Can be over painted

Articles

AttributesArticleDownloads
150 ml Beige 86736 SDS TDS

Application

KENT Exhaust Paste is a high temperature resistant sealant, specifically designed to permanently repair and seal joints, cracks and fissures in fireplaces, ovens and chimneys.
It can also be used for repairing and assembling of vehicle exhaust systems.

Instructions

1. Ensure the surface is clean and free of loose rust, dirt and grease.
2. Abrade the surface with medium emery paper.
3. Extrude the paste into required area.
4. The joint should be tooled within five minutes of application to ensure good contact between the sealant and the substrate.
5. Uncured material can be removed by wiping with a dampened cloth
6. Run the engine at low speed until engine warms up. This will allow the paste to cure and form a gas tight seal.