MS Prep

An adhesion promoter for use with KENT MS Polymer adhesives and all closed surface substrates.

scroll me

Features & Benefits

  • Increase bond strength of MS Polymers to wide range of substrates - ceramic coated or plain glass, plain aluminium, steel, lacquered and power coated metals, GRP, pretreatment of plain aluminium, steel, copper and brass surfaces
  • Fast drying within 2 minutes - decrease time required to change windscreen
  • Easy to use as “wash primer” - cleaner and adhesion promoter in one product, saves time

Articles

AttributesArticleDownloads
100 ml Transparent 83748 SDS TDS

Application

MS Prep can be used as an adhesion promoter on any closed surface for improved adhesion of KENT MS polymers.

Instructions

1. Use with MS-Polymer based sealant / adhesives.
2. With a clean, dry cloth remove any excess dirt from surface.
3. Apply a small quantity of KENT MS Prep to a clean non-synthetic cloth (KENT Finishing cloth) and carefully wipe over area to be sealed/bonded.
4. Allow to dry for approx. 5 mins before applying sealant / adhesive onto surface.
5. Once opened use within 1 month, protect from contamination and evaporation. Ensure can is tightly sealed with plastic cap after use and store in a well ventilated place.