Ultrasonic Conditioning Solution

Simple, fast and cost effective way to restore and refresh a vehicle's ventilation system and cabin surfaces.

scroll me

Features & Benefits

  • Maintain vehicle air quality - safe, simple and cost effective solution
  • Thorough & effective restoration thanks to the ultrasonic system - fast 15 minutes service time.
  • Ideal to promote together with an A/C service/inspection - vehicle can be returned quickly
  • Works on all vehicles - no residual smells
  • Low power consumption - 12V accessory power
  • means vehicle does not occupy service bay

Articles

AttributesArticleDownloads
100 ml White 86043 SDS

Application

The major disadvantage of Air Con Systems is that if they are not regularly maintained, particularly around the evaporator, then deposits quickly collect in the system.
KENT Ultrasonic machine utilizes a portable 12-volt ultrasonic unit that atomizes a specially formulated solution to restore interior air quality.
It penetrates behinds the evaporator and into the vehicle cabin. Ultrasonic technology creates ultra-fine particles for effective refreshment of the unit.
It Includes low level fluid sensor and decreased power consumption.

Instructions

IDENTIFY THE VEHICLE'S CABIN AIR FILTER

REMOVE Cabin Air Filters that are operational during recirculation mode. These filters are normally located inside the vehicle's passenger compartment. (See vehicle's Owner Manual)
DO NOT NEED TO REMOVE Cabin Air Filters located at the outside fresh air intake. These filters are normally found under the hood.For optimum results, set cabin temperature to 22°C.

1. Start button 4. Positioning level

2. Operating light 5. Power indicator

3. Fluid filling hole 6. 12V DC connector
1 - PREPARE UNIT

Before you begin, see the Important Safety Information on the prior page.

Remove cap and seal from conditioning solution bottle and screw the bottle on to the filling-hole snuggly.

Press bottle downward to compress the bottle and fill the unit.

Remove bottle and discard into regular trash.
2 - POSITION UNIT

Place unit on the passenger side floor close to the firewall and point exhaust vent towards the vehicle's air-intake.

Ensure the unit is level. Center air bubble.

Start the vehicle.

Vehicle must be running for the duration of the treatment.
3 - CLIMATE CONTROL

Adjust climate control to ALL of the following settings. Settings may differ between vehicle makes and models. Check owner's manual for proper climate control operations.

• Typical climate controls.

• Turn ON A/C

• Set to RECIRCULATE or MAX A/C

• Set temperature to 22°C

• Set fan speed to HALF SPEED

• Set air-flow to DASH VENTS ONLY
4 - POWER UNIT

• Ensure vehicle is running and A/C is turned “ON”.

• Connect 12V DC connector into the vehicles 12V system.

• Power indicator light will illuminate red.

• Push the red START button.

• Operating light will illuminate green.
5 - OPERATION

Close all windows. Exit vehicle. Close all doors.

DO NOT ENTER OR OPEN DOORS during service.

Service time is 20 minutes.

UNIT WILL SHUT-OFF AUTOMATICALLY and green operating light will blink.

Turn off vehicle.

Leave all doors open for 5 minutes to air out the interior.
6 - FINISH UP

Disconnect 12V DC connector.

Dispose of any remaining fluid in regular drain.

Drain unit by tilting it forward - NEVER BACKWARDS.

Insert air freshener vent clip as a finishing touch.

Replace dust covers and store for next use.

Trace amounts of white dust may be visible on the vehicle's vents. This is normal and easily wipes off with a cloth.