Solder Splice

A High performance splice with an internal ring of solder

scroll me

Features & Benefits

  • Solders wire joints and seals in 1 - fast and secure joints
  • Transparent sleeve - allows inspection and gives insulation
  • Pre-fluxed, pre-formed solder - provides a controlled soldering proces
  • One-piece sleeve - enables easy installation and lowers cost

Articles

AttributesArticleDownloads
6.1mm 20 PC Yellow 34059 TDS
2.7mm 20 PC Red 34063 TDS
4.5mm 20 PC Blue 34064 TDS

Application

Can be used for general joining of wires in applications such as automotive, marine, bus, commercial vehicle and industrial.
When heated, the solder will join the wires, whilst the outer tubing will shrink to hold the wire tightly and give a sealed join.

Instructions

1. Bare both wire ends.
2. Select the correct Solder Splice for the wires.
3. Insert wires in each end of the Solder Splice, making sure the stripped wire sections overlap within the visible solder ring.
4. Apply heat to 1st the solder until it has melted and fused the wires, and 2nd to the remaining transparent sleeve of the solder splice until it has shrunk to the size of the wire. Allow to cool.