PRO 2 TPO

A 2K flexible polyurethane adhesive for repairing TPO plastics.

scroll me

Features & Benefits

  • Solvent free - reduces solvent purchase levels
  • 50ml cartridges allow two average-sized repairs - easy to charge product to the repair
  • Cures within 10 minutes (fully cured in 4 hours) - allows quick through put in workshop
  • Can be over painted once cured using any standard - compatible with all paint systems
  • Sands well - produces a smooth and invisible finish
  • Will adhere even when subjected to extreme pressure - retains impact resistance of original plastic

Articles

AttributesArticleDownloads
50 ml Black 84003 SDS TDS

Application

The KENT TPO cartridge contains two liquid urethanes, which when mixed together will create a very strong plastic adhesive and filler.
TPO has been formulated for the repair of all types of rigid automotive plastics, including repairing of splits, or replacing missing pieces in all damaged plastics such as Bumpers, Grilles, Door Mirrors, Spoilers, Skirts Headlamp casings, Fan shrouds and ducting.
It can also be used as a two-pack fast cure adhesive for bonding together broken plastics such as lugs and mounting brackets.

Instructions

1. Clean area with KENT Plastic Repair Cleaner to ensure any contaminants are removed. Dry naturally or dab off with a clean cloth
2. Using 80 grit wet/dry disc, sand the surrounding areas of the repair.
3. Re-clean repair areas with Plastic Repair Cleaner. Wipe off excess with clean cloth and allow to dry.
4. Apply KENT Plastic Adhesion Promoter to both sides of the repair and allow to dry.
5. Fit the mixer tip to the cartridge, extrude and dispose of first 2-3cm of product then apply a ball/bead of KENT TPO onto one surface of the repair area.
6. Within 1 minute, bring both components together and apply uniform pressure to spread product evenly over repair so product extrudes from repair area.
7. Within 1 minute and if required, apply additional KENT TPO to the surrounding area to provide extra strength to the repair.
8. Hold the component in final required position for a minimum of 1 minute. After 10–15 minutes at 20°C, sand the repair area to a smooth finish if required.
9. Allow 1 hour at 20°C between product application and painting.
Avoid excessive speed. Care must be taken not to overheat the plastic.
Uncured product may be removed from tools and equipment with Acrysol. Once cured the adhesive must be removed mechanically.