Plaz Tex Clear 2

Allows the replication of the moulded texturising on modern plastic bumpers, dashboards and other plastic fittings.

scroll me

Features & Benefits

  • Recreates OEM Finish - gives undetectable repair
  • Fast dryingquick - throughput in workshop
  • Suitable for most plastics - use with confidence
  • Compatible with leading paint systems - no comebacks

Articles

AttributesArticleDownloads
400 ml Transparent 84586 SDS TDS

Application

Plaz Tex Clear 2 is the ideal solution to re-texturing plastics after a plastic repair has been undertaken.
It can be used for cosmetic repairs on:
Holes in dashboards, centre consoles, plastic door panels and fascia trim.
Typical applications include: -
• Existing Plastic Repair
• Bodyshops
• SMART Repair specialists
• Used vehicle preparation sites
• Fleet repair specialists

Instructions

Key area requiring texturising with light abrasive or nylon finishing pads.
De-grease with suitable cleaner such as KENT Plastic Prep or Acrysol.
Allow to dry thoroughly
Mask off area to be re-textured.
Shake aerosol can thoroughly before use
Spray light coats of Plaz Tex Clear 2 to repair surface from a distance of 20–30cm in short, sweeping bursts.
Allow a minimum of 5 minutes between coats.
Repeat steps 2/3 until desired finish is achieved.
It will be necessary to feather (blend) in the edge of the re-textured area with the natural texture of the bumper.
NB. Invert can and spray out to avoid blockage of the nozzle.